Abstract
A study of the mixed 07С11-KВ fabric (produced by Mogotex) with a coating of steel 12X18H10T, obtained by the method of pulsed cathode arc deposition in a vacuum of 3.5×10–3 Pa, was conducted. It is shown that optical microscopy has a number of advantages in studying the surface morphology of such objects as compared to scanning electron microscopy. The most contrast image is formed using dark-field illumination. When coating is applied, a droplet phase is formed, the droplet sizes vary from 2 to 10 microns. By the method of electron paramagnetic resonance, it has been established that the spectrum of coated fabric has an asymmetrical spectral line with a width of 101mT,which indicates a high concentration of magnetic resonance centers and a significant resonant absorption of microwave energy. Resonant absorption at low magnetic fields is determined by clusters of iron, nickel, chromium, titanium, etc., with weak nonresonant absorption. The specific surface resistance of the fabric (side 1 / side 2) is 3.3×105 ohm and 5.6×105 ohm,respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY)
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
