Surface modification of nitrocellulose by interfacial self-assembly of metal-phenolic network for enhanced thermal stability and eco-friendly propulsion energy

Abstract

Metal-phenolic networks (MPNs) have received widespread interest owing to their ability to incorporate metal ions and phenolic ligands in a modular manner. However, the effect of MPNs on nitrocellulose (NC), an energetic material for propulsion, has not been extensively investigated. Herein, we fabricated MPN-coated NC fibers (NC@MPN) and confirmed the successful coating and homogeneous distribution of MPN on the surface of NC through Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), UV–visible spectroscopy, scanning electron microscopy (SEM) and Energy Dispersive spectroscopy (EDS). The thermal stability of NC was enhanced as evidenced by differential scanning calorimetry (DSC), accelerating rate calorimetry (ARC) and the ignition point test. The thermal decomposition activation energy of NC@MPN can reach 200.73 kJ•mol−1, 7.50 % higher than that of NC primitive fiber (186.72 kJ•mol−1). The ARC tests demonstrate that the implementation of MPN coating prolonged the time of entering the adiabatic section by 5.4 °C and the forecast temperatures for TD8 and TD24 have increased by 4.6 and 4.8 °C, respectively. Additionally, the ignition point was also raised by 2 °C. The aforementioned three experimental results provide evidence for the enhanced thermal stability conferred by MPNs. Besides, thermogravimetric analysis (TGA) results demonstrate a reduction in the residue from thermal decomposition. The present study presents a simple and robust coating strategy for the modular surface engineering of energetic materials, which significantly improves thermal stability and reduces the residues of thermal decomposition.