Superior electrochemical performances of Lithium vanadium oxide with coconut shell-based porous carbon as the anode of the aqueous Li ion battery

Abstract

Carbon materials, as the skeleton structure of electrode materials, are composited with lithium-ion anode materials, which not only increase the electrical conductivity of the materials, but also enhance the electrochemical performance of the electrode materials. In this paper, LiV3O8@C composites were prepared by using coconut shell-based porous carbon to structurally modulate aqueous lithium-ion anode materials. And three composites with different structures and sizes were successfully synthesized by hydrothermal method, hydrothermal stirring method and improved solid-phase method. After XRD and SEM analyses, it was found that all three composites maintained the monoclinic crystal system structure of LiV3O8, and the materials prepared by the hydrothermal method showed a smooth layer structure, while the materials prepared by the hydrothermal stirring method and the solid-phase method showed nanorods with different sizes. The prepared anode materials and LiFePO4 cathode materials were assembled into an aqueous lithium-ion full battery, and were subjected to charge/discharge tests, cyclic voltammetry and electrochemical impedance spectroscopy. The results indicate that the electrochemical performances of the three composites are significantly improved compared with the pure LiV3O8. Specifically, the discharge capacities of the two groups of nanorod-like composites were 112.2 mAh/g and 85.5 mAh/g at a rate of 0.2 C, which were improved by as much as two times compared with the pure LiV3O8. However, the composite material with layered structure not only reaches an initial discharge specific capacity of 148.39 mAh/g, which is 2.7 times higher than that of the pure LiV3O8, but also effectively slows down the dissolution effect of LiV3O8 by compositing with the carbon material, and at the same time, it shows excellent rate performance.