Abstract

Members of the CaK(Fe$_{1-x}$Mn$_{x}$)$_{4}$As$_{4}$ series have been synthesized in single crystalline form and characterized by elemental analysis, thermodynamic and transport measurements. These measurements show that the superconducting transition temperature decreases monotonically and is finally suppressed below 1.8 K. For $x$-values greater than 0.016, signatures of a magnetic transition can be detected in both thermodynamic and transport measurements in which kink-like features allow for the determination of the transition temperature, $T^*$, that increases as Mn substitution increases. A temperature-composition ($T$-$x$) phase diagram is constructed, revealing a half-dome of superconductivity with the magnetic transition temperature, $T^*$, appearing near 26 K for $x$ $\sim$ 0.017 and rising slowly up to 33 K for $x$ $\sim$ 0.036. Specific heat data are used to track the jump in specific heat at $T_c$; The CaK(Fe$_{1-x}$Mn$_x$)$_4$As$_4$ data does not follow the scaling of $\Delta$$C_{p}$ with $T_{c}^3$ as many of the other Fe-based superconducting systems do. Elastoresistivity coefficients, $2m_{66}$ and $m_{11}-m_{12}$, as a function of temperature are also measured. $2m_{66}$ and $m_{11}-m_{12}$ are qualitatively similar to CaK(Fe$_{1-x}$Ni$_x$)$_4$As$_4$. This may indicate that the magnetic order in Mn substituted system may be still the same as CaK(Fe$_{1-x}$Ni$_x$)$_4$As$_4$. A clear change in $H^\prime_{c2}$($T$)/$T_c$, where $H^\prime_{c2}$($T$) is d$H_{c2}$($T$)/d$T$, at $x$ $\sim$ 0.015 is observed and probably is related to change of the Fermi surface due to magnetic order. Coherence lengths and the London penetration depths are also calculated based on $H_{c1}$ and $H_{c2}$ data. Coherence lengths as the function of $x$ also shows the changes near $x$ = 0.015.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.