Sulfur-free dissolving pulps and their application for viscose and lyocell

Abstract

In this study, the concept of multifunctional alkaline pulping has been approved to produce high-purity and high-yield dissolving pulps. The selective removal of hemicelluloses was achieved by either water autohydrolysis (PH) or alkaline extraction (E) both applied as pre-treatments prior to cooking. Alternatively, hemicelluloses were isolated after oxygen delignification in a process step denoted as cold caustic extraction (CCE). Eucalyptus globulus wood chips were used as the raw material for kraft and soda-AQ pulping. In all process modifications sulfur was successfully replaced by anthraquinone. By these modifications purified dissolving pulps were subjected to TCF bleaching and comprehensive viscose and lyocell application tests. All pulps met the specifications for dissolving pulps. Further more, CCE-pulps showed a significantly higher yield after final bleaching. Morphological changes such as ultrastructure of the preserved outer cell wall layers, specific surface area and lateral fibril aggregate dimension correlated with the reduced reactivity towards regular viscose processing. The residual xylan after alkali purification depicted a lower content of functional groups and a higher molecular weight and was obviously entrapped in the cellulose fibril aggregates which render the hemicelluloses more resistant to steeping in the standard viscose process. Simultaneously, the supramolecular structure of the cellulose is partly converted from cellulose I to cellulose II by the alkaline purification step which did not influence the pulps reactivity significantly. Nevertheless, these differences in pulp parameters did not affect the lyocell process due to the outstanding solubility of the pulps in NMMO. Laboratory spinning revealed good fiber strength for both, regular viscose and lyocell fibers. The high molecular weight xylan of the CCE-treated pulps even took part in fiber forming.