Abstract
We have conducted a comprehensive thermodynamic analysis of the volatility of 128 binary oxides to evaluate their suitability as source materials for oxide molecular-beam epitaxy (MBE). 16 solid or liquid oxides are identified that evaporate nearly congruently from stable oxide sources to gas species: As2O3, B2O3, BaO, MoO3, OsO4, P2O5, PbO, PuO2, Rb2O, Re2O7, Sb2O3, SeO2, SnO, ThO2, Tl2O, and WO3. An additional 24 oxides could provide molecular beams with dominant gas species of CeO, Cs2O, DyO, ErO, Ga2O, GdO, GeO, HfO, HoO, In2O, LaO, LuO, NdO, PmO, PrO, PuO, ScO, SiO, SmO, TbO, Te2O2, U2O6, VO2, and YO2. The present findings are in close accord with available experimental results in the literature. For example, As2O3, B2O3, BaO, MoO3, PbO, Sb2O3, and WO3 are the only oxides in the ideal category that have been used in MBE. The remaining oxides deemed ideal for MBE awaiting experimental verification. We also consider two-phase mixtures as a route to achieve the desired congruent evaporation characteristic of an ideal MBE source. These include (Ga2O3 + Ga) to produce a molecular beam of Ga2O(g), (GeO2 + Ge) to produce GeO(g), (SiO2 + Si) to produce SiO(g), (SnO2 + Sn) to produce SnO(g), etc.; these suboxide sources enable suboxide MBE. Our analysis provides the vapor pressures of the gas species over the condensed phases of 128 binary oxides, which may be either solid or liquid depending on the melting temperature.
Highlights
Oxides are of enormous interest for a wide range of applications due to the useful behaviors they exhibit, often with property coefficients or figures of merit at or near the very highest
We have conducted a comprehensive thermodynamic analysis of the volatility of 128 binary oxides to evaluate their suitability as source materials for oxide molecular-beam epitaxy (MBE). 16 solid or liquid oxides are identified that evaporate nearly congruently from stable oxide sources to gas species: As2O3, B2O3, BaO, MoO3, OsO4, P2O5, PbO, PuO2, Rb2O, Re2O7, Sb2O3, SeO2, SnO, ThO2, Tl2O, and WO3
A comprehensive thermodynamic investigation regarding the evaporation behavior of 128 binary oxides has been performed to evaluate their suitability as MBE source materials
Summary
Oxides are of enormous interest for a wide range of applications due to the useful behaviors they exhibit, often with property coefficients or figures of merit at or near the very highest. MBE is widely employed for making high-quality thin films scitation.org/journal/apm because of its clean, ultra-high vacuum environment allowing film synthesis to be monitored by a variety of techniques during growth as well as its notable absence of highly energetic species. These characteristics allow for the precise customization of thin films with very few impurities and minimal disorder.[15] When it comes to preparing materials that are highly sensitive to crystalline perfection, MBE achieves electrical transport characteristics surpassing all other thin film growth methods, making it the gold-standard technique for preparing oxide heterostructures.[16,17,18,19]
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
