Abstract
Sugarcane is an important industrial crop in India and the by-product bagasse is used as a fuel in sugar industries generating large quantities of fly ash. Unburned carbon from waste bagasse fly ash was used to prepare porous carbon for use as adsorbent and catalyst support for VOC removal. The carbons were prepared by steam activation and phosphoric acid modification. The textual properties, thermal stability and surface chemistry were characterized in detail using different techniques and the prepared samples from industrial unburned carbon were tested for toluene adsorption. A commercial carbon was also characterized and tested for comparison. The surface area and pore volume increased on activation while the surface oxygen was reduced. Phosphoric acid modification led to incorporation of phosphorus on the surface of the prepared carbons which led to improved thermal stability which was higher than the commercial activated carbon. The toluene adsorption capacity of the carbons synthesized in this study is improved with increasing degree of activation which corresponds with lower surface oxygen and greater micropore volume both of which promote VOC adsorption.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.