Styrene divinyl benzene beads (SM-2) functionalized with triisobutylphosphine sulfide for selective uptake of palladium(II) from nitric acid medium

Abstract

Listen

Translate article

Resins impregnated with organic extractants regarded as effective adsorbent materials due to their ability for selective sorption. These resins consist of a polymeric material that is infused with accessible organic extractants. Furthermore, these resins merge the unique properties and the distinctive characteristics of both liquid-liquid extraction and solid-liquid sorption processes. In this work, the impregnation of Styrene divinyl benzene beads (SM-2 beads) with triisobutylphosphine sulfide (TIBPS = CYANEX 471X) was prepared. A SM-2 bead functionalized with CYANEX 471X (SM-2-TIBPS beads) was characterized using scanning electron microscope (SEM) and Fourier-transform infrared spectroscopy (FT-IR) techniques and investigated for recovery and separation of palladium ions from a 3 M nitric acid solution. Various parameters were studied, as shaking time effect, nitric acid concentration, SM-2-TIBPS beads weight, Pd(II) concentration and temperature. The Pd(II)/SM-2-TIBPS sorption system has an endothermic nature and was fitted with a Langmuir isotherm model with a 0.9860 regression factor. The kinetics modeling was fitted with PSO and IPD models with regression factors of 0.9889 and 0.9959, respectively. The maximum monolayer sorption capacity of SM-2-TIBPS was found to be 17.47 ± 0.9 mg/g. The sorption of Pd(II) from different media at 3 M takes the following sequence: HNO3 > HCl > H2SO4. Desorption of about 76.38 ± 2.4% was achieved with (1 M + 1 M) of thiourea + HCl after one desorption stage. Effect of other interfering ions, as Pt(II), Pb(II), Eu(III), Cu(II), Mo(VI), Co(III), Zr(IV), Fe(III), Cd(II), and Ce(III), indicates high separation factors between Pd(II) and other investigated metal ions, which ranged from 9.4 to 35.