Abstract
The development of hard coating based on colloidal silica nanoparticles on polymethyl methacrylate (PMMA) sheet was reported. The colloidal silica was surface-modified with methyltrimethoxysilane (MTMS) and formulated to hard coating solution via sol-gel process. The hard coating solution was applied to PMMA surface by spray deposition technique. Spraying process was carried out from spray nozzle outlet diameter of 0.35 mm and air compress pressure at 0.2 MPa with nozzle to substrate distance at 10 cm. The different coating thicknesses were obtained by adjusting the amount of coating applied. The optimal coating thickness that gives the highest pencil-hardness at 7H and 100% adhesion for adhesion tape test is 10 μm.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
