Study on VSCF wind power generation system control based on DSP

Abstract

According to the characteristics of double fed asynchronous generator rotor energy flow, research and design based on the DSP control with two-way flow of energy function of Dual PWM converter and discusses the grid side converter control method of Dual PWM converter in particular. The wind turbine simulation model is established by using the electromagnetic transient PSCAD/EMTDC software. The simulation system is used to simulate the P, Q decoupling control and maximum wind energy tracking control of the generator. Wind is a natural phenomenon generated by the solar radiation heat, the earth's surface caused by uneven heating of the atmosphere. It is estimated that only 1% of the wind on the ground will be able to meet the needs of the world's energy. With the continuous improvement of the level of wind power generation technology, the cost of wind power gradually reduced, considering environmental benefits, the cost will be close to the cost of coal-fired power generation. Therefore, great efforts to develop wind energy as the representative of the renewable energy and new energy, to achieve sustainable development, has become the consensus of the whole society, strategic choice to solve the energy crisis and environmental problems. 2.Overview of control technology of doubly fed wind power gener ation Wind power is the kinetic energy contained in the natural wind into electrical energy in the process, the wind turbine wind energy capture and convert it into mechanical energy, driven by rotary generator, and the generator for converting mechanical energy conversion into electrical energy. As countries around the world pay more attention to wind power, wind power has become the world's fastest, most widely studied and applied new energy technology. With the development of wind power technology, wind turbine, wind turbine generator, converter and its control system and the way of the wind turbine, there are different types of. Among them, the doubly fed wind power generation system due to the converter control capacity is small, the speed of operation range wide characteristics become currently the world's most widely used VSCF wind power generation system. Variable speed constant frequency generator in asynchronous generator rotor side applied three-phase low frequency current to realize AC excitation, the output power is constant frequency and constant voltage amplitude, frequency, phase of the exciting current control. At the same time, the active power and reactive power decoupling control of the generator is realized by using the vector control technology. Control active power capable of adjusting the rotation speed of the wind turbine, to capture the maximum wind power tracking control; regulation of reactive power adjustable power factor and improve the dynamic and static stability of the wind turbine and power system operation. In addition, the VSCF wind power generation technology, so to achieve good flexible connection between the generator and power grid system, compared with the traditional constant speed constant frequency generation system easier to achieve grid connected operation and operation