Abstract
The tribological behaviour of Aluminium metal matrix composite studied by adding TiC particles. Centrifugal casting method was used for the preparation of composite specimens. The samples were prepared with varying the weight percentage of TiC particles such as 2.5%, 5% and 7.5%. The Taguchi technique was used for preparation of design of experiments by considering weight percentage, load and sliding distance as control parameters. The specific wear rate and coefficient of friction is determined with the help of Ducom made pin on disc machine. The ANOVA is applied to predict the effect of each factor over specific wear rate and coefficient of friction. The results show that the weight percentage of TiC reinforcement has significant effect on specific wear rate as well as coefficient of friction. The wear resistance of composite material is increased with increase in TiC reinforcement. The mathematical model through regression is predicted for specific wear rate and coefficient of friction.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
