Abstract
A micro-channel separate heat pipe (MCSHP) as a cooling device for telecommunication stations (TSs) was experimentally investigated in this work. A steady-state mathematical model was built and validated with experimental data. The cooling capacity, inlet and outlet of refrigerant temperatures and refrigerant pressure of evaporator section were measured in an enthalpy difference laboratory (EDL). The average relative errors between simulation and experiment were less than 10%. The effects of geometrical design and environment conditions on thermal performance were analyzed using the validated model. As a result of the simulations, the refrigerant side pressure drop decreased by 96.61% at the flat tube height 3.0 mm compared to 1.4 mm. And the air side pressure drop decreased by 94.49%, when fin height ranged from 4 mm to 20 mm. The cooling capacity increased by 50.65% at the fin pitch 3.0 mm compared to 1.0 mm. These factors were of practical engineering importance in optimum design of MCSHP.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
