Abstract

The mechanical properties of the polymer matrix are crucial for forming a stable and dense transfer film between the friction pairs, facilitating friction reduction and wear resistance. This work introduces a novel polyurethane composite (PUC) system, prepared by incorporating the MXene (Ti3C2Tx) into a polyurethane elastomer, which exhibits a robust strength of ∼ 64 MPa and an excellent toughness of ∼ 155.8 MJ/m3. The PUC containing 0.5 wt% MXene (PUC0.5) exhibited excellent tribological properties, with the friction coefficient and wear rate (66 N, 0.54 m/s) reduced by 45.1 % and 206 % in comparison to pure PU, respectively. The excellent tribological properties of PUC0.5 are attributed to exceptional mechanical properties and low shear of MXene.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.