Abstract
Demulsification and crude oil desorption are usually a necessary step for the treatment of oily sludge in the petroleum industry. In this study a binary mixed bio-surfactant (rhamnolipid / sophorolipid, RL/SL) was used to strengthen the removing oil efficiency for oily sludge by thermal washing method. Surface tension values of the single and the mixed surfactants were carried out to investigate the effect of mixing systems on reducing critical micelle concentrations (CMC) value. The models proposed by Clint, Rubingh and Gibbs et al. had been employed to interpret the formation of mixed micelles and synergism and found out in case of the mass ratios of 4:6 the synergism was the strongest in RL and SL mixed surfactant systems, which was selected as the washing agents to treat the oily sludge produced from Huabei oilfield. Through the optimization of oil washing process parameters, the oil removal rate reached the maximum value (95.66%, residual oil rate 1.98%) at the condition of heating temperature of 45 °C, detergents concentration of 500 mg/L, washing time of 3 h, liquid/solid mass ratio of 1:4, stirring speed of 300 r/min, and washing 4 times. The factors affecting the oil washing effect were analyzed from the composition and performance characteristics of oily sludge samples, washing oil system and washing process parameters. The results showed that low oil content of oily sludge, small specific surface area, strong wetting and solubilization of the oil-washing system all can increase the oil-washing effect and the washing time and temperature had a great influence on the oil-washing effect. Compared with the results of other researchers, the oil washing temperature and the concentration of oil washing agent were significantly lower and high oil removal rate and low residual oil rate were obtained in this study. It was confirmed that thermal oil washing method using RT/SL binary bio-surfactant mixing system was proved to a high-efficiency, low-consumption and wide range of applications technology.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
