Study on the microstructure and mechanical property of Cu-foam modified Sn3.0Ag0.5Cu solder joints by ultrasonic-assisted soldering

Abstract

Cu-foam sheets with the thicknesses of 0.15 mm and 0.5 mm were utilized as strengthening structure to improve the performances of the Sn3.0Ag0.5Cu (SAC305)/Cu solder joints. The ultrasonic-assisted soldering was applied to manufacture the solder joints. The effects of Cu-foam and ultrasound-assisted soldering time on microstructure and mechanical property of solder joints were researched. Experimental results showed that excellent metallurgical bonding was generated between the copper substrate and the Cu-foam/SAC305 composite solder layer. The average thickness of interfacial intermetallic compound (IMC) layer decreased with the increase of ultrasonically soldering time, and a thinner interfacial IMC layer was found in the joints with ultrasonic treatment in narrow channels. With the ultrasonic soldering time prolonged, the Cu 6 Sn 5 grains became more refined. Some round-shape Cu 6 Sn 5 grains were transformed into hexagonal prismatic with the increase of the ultrasonic soldering time. The shear test was conducted for the solder joints under different soldering conditions. It was found that the shear strength of the Cu-foam/SAC305 composite solder joints were higher than that of SAC305 solder joints. The grain refinement caused by ultrasonic cavitation significantly improved the shear strength of the solder joints. Besides, the fracture behavior of solder joints without ultrasonic vibration was classified to be ductile-brittle mixed type while that with ultrasonic vibration was changed to be ductile type.