Study on the mechanism of energy evolution and bearing degradation in pre-cracked sandstone under non uniform cyclic loading

Abstract

The engineering rock mass is affected by the original cracks, which increases the uncertainty of instability and failure mechanisms. Under the action of excavation unloading or other disturbance loads, its bearing properties are more complex and the deformation characteristics is more special, which has always been a difficult issue in the analysis of rock mechanics. In order to explore the propagation and failure mechanism of spatial micro cracks in fractured rock masses, acoustic emission (AE) experiment of sandstone was carried out under pre-static loading and low-frequency stepwise cyclic loading–unloading. The research results indicate that the peak strain and crack initiation stress of rocks with different pre-cracked positions have the highest differences of 12.62% and 18.65%, respectively. The difference between peak stress and crack initiation strain is within 4%. The pre-cracked position mainly affects the peak strain and crack initiation stress of pre-cracked rocks, and its effect on peak stress and crack initiation strain is limited. The crack initiation angle of prefabricated cracks is mainly distributed within the range of 45° − 90°, and it decreases with the increase of quantities of prefabricated cracks. The crack initiation angle of rocks with prefabricated three cracks is 30% lower than that of single crack. The research results have deepened the analysis of energy evolution and deformation damage of fractured rock masses.