Study on the Deformation Mode and Energy Absorption Characteristics of Protective Honeycomb Sandwich Structures Based on the Combined Design of Lotus Root Nodes and Leaf Stem Veins

Abstract

Sandwich structures are often used as protective structures on ships. To further improve the energy-absorbing characteristics of traditional honeycomb sandwich structures, an energy-absorbing mechanism is proposed based on the gradient folding deformation of lotus root nodes and a leafy stem vein homogenizing load mechanism. A honeycomb sandwich structure is then designed that combines lotus root nodes and leafy stem veins. Four types of peak-nest structures, traditional cellular structure (TCS), lotus root honeycomb structure (LRHS), leaf vein honeycomb structure (LVHS), and lotus root vein combined honeycomb structure (LRVHS), were prepared using 3D printing technology. The deformation modes and energy absorption characteristics of the four honeycomb structures under quasistatic action were investigated using a combination of experimental and simulation methods. It was found that the coupling design improved the energy absorption in the structural platform region of the LRHS by 51.4% compared to that of the TCS due to its mechanical mechanism of helical twisting and deformation. The leaf vein design was found to enhance the peak stress of the structure, resulting in a 4.84% increase in the peak stress of the LVHS compared to that of the TCS. The effects of the number, thickness, and position of the leaf vein plates on the honeycomb structure were further explored. The greatest structural SEA effect of 1.28 J/g was observed when the number of leaf vein plates was four. The highest SEA of 1.36 J/g was achieved with a leaf vein plate thickness of 0.6 mm, representing a 7.3% improvement compared to that of the 0.2 mm thickness. These findings may provide valuable insights into the design of lightweight honeycomb sandwich structures with high specific energy absorption.