Abstract
Fiber-reinforced cement matrix composites (CMCs) have gained significant attention due to their ability to enhance material properties for use in demanding environments. This study investigated the workability and mechanical properties of polyvinyl alcohol (PVA) fiber-reinforced CMCs, focusing on compressive strength, split tensile strength, and flexural strength. It also assessed water absorption capacity through immersive water absorption tests using cubes and capillary water absorption tests using cylinders, alongside bulk density measurements for both shapes. The results indicated that the dosage of PVA fibers significantly influences the workability of CMCs, while the water-to-binder ratio has a minimal effect. Increasing the dosage of PVA fibers in CMCs from 0.5 vol.% to 1 vol.% led to a decrease in several properties: compressive strength decreased by 13.38%, split tensile strength by 21.05%, flexural strength by 9.23%, bulk density of cube samples by 4.14%, and bulk density of cylindrical sample by 6.36%. Conversely, both immersive water absorption and capillary water absorption increased, rising by 10.87% and 77.71%, respectively. Compressive strength was found to increase with the bulk density of the cubes and to decrease with rising immersive water absorption. Similarly, split tensile strength increased with the bulk density of the cylinders and decreased as capillary water absorption increased. Strong correlations were observed among three key pairwise combinations: the bulk density of cubes and immersive water absorption (R2 = 94%), compressive strength and bulk density of cubes (R2 = 96%), and compressive strength and immersive water absorption (R2 = 92%). Furthermore, the analysis and comparison of carbon fiber-reinforced and PVA fiber-reinforced CMCs will provide important references for the field, especially in cases where material availability or cost varies.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
