Abstract

Enhancing the volumetric energy density of fuels is a crucial approach in the exploration of efficient energy sources. As a commonly used high-energy additive, Aluminum nanoparticles (Al NPs) holds broad application prospects. This study delves into the effects of Al NPs on the combustion characteristics of methanol and ethanol fuels through in-depth analysis of single droplet combustion and spray combustion experiments involving alcohol-based nanofluid fuels. The experiments revealed that adding Al NPs significantly enhances fuel combustion efficiency, shortening both the combustion life and ignition delay time. Spray combustion tests demonstrated that adding 2 wt% Al NPs increased the maximum and average flame propagation speeds of ethanol fuel spray by 48.93 % and 47.94 %, respectively, while the maximum explosion pressure rose from 0.66MPa to 0.83MPa, with a reduced time to reach peak explosion pressure by 106ms. Based on the SEM and XRD characterization results of the combustion residues and the analysis of flame morphology, a physical model of the alcohol-based nanofluid fuel spray combustion flame was established. Numerical simulations of the gas-phase kinetics model showed that the generation rates of radicals such as H, O, and OH were significantly increased with the addition of Al NPs, intensifying the combustion reaction. The findings provide a theoretical basis for future fuel design and combustion performance optimization.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.