Abstract

AbstractTo investigate the real anchorage performance of basalt and glass hybrid fiber reinforced plastic (FRP) anchors in external corrosive environments. In this paper, a combination of experimental studies and finite element analysis was used. By carrying out pull‐out tests of basalt and glass hybrid FRP anchors under the synergistic effect of freeze–thaw cycles and alkaline environment, the effects of factors such as hole diameter, anchorage length, and mortar strength on their anchorage performance and durability were investigated. Critical corrosion time was introduced to determine the degree of corrosion of the anchor rods. After that, it combined with numerical simulation to reveal the degradation mechanism of the anchorage performance of hybrid anchors. The results showed that the best anchorage performance of basalt/glass hybrid FRP anchors was achieved when the hole diameter was 24 mm, the anchorage length was 175 mm, and the mortar strength was 45.5 MPa. The ultimate pull‐out load was up to 122.16 kN. When the time did not exceed the critical corrosion time, the ultimate load‐carrying capacity of basalt and glass hybrid FRP anchors increased by 9.3% compared to the uncorroded environment. Beyond the critical corrosion time, the ultimate load‐carrying capacity was reduced by 23.3% and the anchorage performance was degraded. In addition, the contact interface between the anchor and the mortar is the weak area of the anchoring structure, which should be focused on in the later design of the actual project.Highlights Basalt/glass hybrid FRP anchors have good corrosion resistance. The anchoring performance of hybrid FRP anchors under the coupled environment is studied. Hole diameter and anchoring length have more influence on the anchor performance. The concept of critical corrosion time is put forward. The failure mechanism and coupling environment influence are revealed by FES.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call