Study on seismic response characteristics of living stumps slope based on large-scale shaking table test

Abstract

Listen

Translate article

A large-scale shaking table test of a living stump slope with a geometric similarity ratio of 1:7 was designed and completed. The peak acceleration, acceleration amplification factor, and displacement response patterns of living stumps slopes under different types of seismic waves and excitation intensities were obtained. The time-frequency and energy variation characteristics were analyzed using the Hilbert-Huang Transform (HHT). The results showed that: (1) Regardless of the type of seismic wave, the peak acceleration and acceleration amplification factor of the living stumps slope surface are positively correlated with relative height and seismic excitation intensity. When the excitation intensity is ≤ 0.4 g, the acceleration amplification effect is more pronounced; when the excitation intensity is > 0.4 g, the acceleration amplification effect weakens. (2) Under the action of different seismic waves, the peak displacement of slope surface shows amplification effect along the elevation, and increases with the increase of excitation intensity. In addition, the incremental displacement gradually decreases from the toe to the top of the slope, which is expressed as D2 > D3 > D1 > D4 > D5. The peak displacement at the top of the slope is the greatest, but the incremental displacement is the smallest; the peak displacement at the toe of the slope is the smallest, but the incremental displacement is relatively large. (3) Regardless of the type of seismic wave, living stumps slope shows the characteristics of filtering the low-frequency components of the seismic waves and amplifying their high-frequency components. At the same time, the seismic Hilbert energy gradually accumulates along the elevation. PSHEA and PMSA significantly increase with elevation and excitation intensity, and they reach the maximum at the top of the slope. (4) The seismic Hilbert energy is positively correlated with the relative height and excitation intensity, and reaches the maximum at the top of the slope. With the accumulation of seismic Hilbert energy increases, the dynamic response parameters such as peak acceleration, acceleration amplification coefficient and displacement also increase synchronously, reaching the maximum at the top of the slope. The research conclusions can provide an experimental basis for the seismic design of living stumps slopes.