Study on Optimization of Operating Parameters of Contact Mechanical Seal Based on Orthogonal Test

Abstract

The working condition parameters of common contact mechanical seals are experimentally studied by orthogonal experimental design. The effects of working condition parameters on mechanical seal performance are compared by variance and range analysis, and the optimal sealing working condition is put forward. The results show that the spring specific pressure has a great influence on the leakage of mechanical seal, and the leakage decreases rapidly with the increase of spring specific pressure; With the increase of spring specific pressure, the friction power consumption increases. According to the test results, considering the requirements of mechanical seal performance and service life, the optimal spring specific pressure is 0.028 MPa under the condition of medium pressure ps =0.60 MPa and motor speed n =2960 r/min. At this time, the leakage is 6.120 ml/h and the friction power consumption is 0.648 kW.