Abstract
Two reactors simulated rectangular sedimentation tank were used to treat micro-polluted raw water under same conditions. The reactor No.1 simulated rectangular sedimentation tank and rectangular biological sedimentation tank was simulated by the reactor No.2, in which three-dimensional elastic fillers were hanged. The process of biofilm developing in the reactor No.2 was researched to determine the optimal retention time of the reactor No.2. After determine the best retention time, comparing ammonia, CODMn, turbidity and other water quality indicators in the two reactors that operated steadily was used to compare the treatment effect of organic. Then, the factors that affect the removal of ammonia were analyzed. The results show that the reactor No.2 could hang the biofilm naturally and successfully and its optimal retention time is 1.5h. In the process of stable operation, the removal rates of ammonia, CODMn, turbidity in the reactor No.2 are 30.07%, 21.78% and 76.76% respectively that are all above the reactor No.1. So hanging the biofilm in the rectangular sedimentation tanks to treat micro-polluted raw water has a certain research value.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.