Study on mechanical properties and fracture modes of sandstone with cracks under triaxial compression

Abstract

AbstractThis study examines the mechanical properties and fracture modes of sandstone with single and double cracks under varying confining pressures through triaxial compression tests. The stress–strain curves, mechanical parameters, and fracture modes of both intact and cracked sandstone are analyzed based on experimental results. The study finds that the presence of cracks has a significant impact on the mechanical properties of sandstone, with greater damage observed with an increase in the number of cracks. The peak strength and strain of a cracked rock sample increase with the increase in crack angle. The fracture mode of sandstone is influenced by both crack angle and confining pressure. When the crack angle is small, the fracture mode is a combination of shear and tensile failure, while a large crack angle results in shear failure. Moreover, as the confining pressure increases, the degree of damage to the sandstone also increases.