Abstract
Sn-doped n-type and Cu-doped p-type ZnO films were fabricated by depositing solutions derrived by sol–gel route on glass substrates through dip-coating cycles. The X-ray diffractometry demonstrates the typical crystalline structure of hexagonal wurzite of ZnO. The surface morphology was made through scanning electronmicroscopy showing the density and shape of films’ grains of which size was determined between 40 and 55 µm. The results of Hall measurement indicate clearly the material nature of fabricated films at room temperature. The best electrical property of Sn-doped n-type ZnO films is corresponding to Sn content of 2 at.% with carrier concentration of 3.0 × 1018 cm−3. The formation of p-type ZnO thin films was elucidated by the manner of solution synthesis that glucose was added into the solube mixer of zinc acetate and copper(II) nitrate trihydrate and the way of thermal treatment for films in vacuum with pretty good hole concentration of about 1015 cm−3. The electrical transport properties characterizing thermoelectric (TE) behavior of all films were investigated between room temperature to 400 °C (or from 300 to 673 K). The obtained results of electrical conductivity, Seebeck coefficient and power factor revealed that Sn-doped n-type ZnO films have the quality and properties similar to Al-doped ones and Cu-doped ZnO films can be promising p-type materials for TE applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Materials Science: Materials in Electronics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.