Abstract
The evolution of microstructure of low alloy CrMo steel has a great influence on the mechanical properties. Three different tempering heat treatment conditions were made on the material, and the influence of the microstructure on the impact toughness under different test temperatures was studied. The type, morphology, size and distribution of the second phase will evolve with the change of tempering temperature and time. Impact energy of all samples increases gradually from the lower shelf to upper shelf with the testing temperature increasing. In the lower shelf, the fracture is controlled by the crack nucleation. In the ductile-to-brittle transition temperature (DBTT) range, the fracture is determined by the size of the initial crack initiating on the second phase. In the upper shelf, the cleavage fracture is controlled by the propagation of the carbide crack into continuous grains, and the critical event for fracture is the plasticity of the matrix. The scattering of impact energy in DBTT range is caused by the uneven distribution and size of the brittle second phase.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.