Study on hydrodynamics characteristics in a gas-liquid stirred tank with a self-similarity impeller based on CFD-PBM coupled model

Abstract

BackgroundIn general, radial impeller has been the most widely employed for the gas-liquid mixing process in the stirred tank. However, gas cavities are easy to form behind the impeller blades, which results in the waste of power consumption, the limited gas handling capacity of impeller and the poor dispersion of gas. Based on self-similarity property of nonlinear theory, a type of self-similarity impeller was employed to strengthen gas-liquid dispersion process in this work. MethodsThe hydrodynamics of gas-liquid dispersion process in a stirred tank with Rushton turbine and self-similarity impeller were comparatively investigated by computational fluid dynamics (CFD) simulation combined with a population balance model (PBM). The gas holdup distribution, gas cavities, relative power demand (RPD), bubble size distribution and turbulent intensity analysis in the gas-liquid dispersion process were predicted. Significant findingsResults showed that self-similarity impeller could destroy the gas cavity structure, reduce the negative pressure zone and gas accumulation, enhance the relative power demand (RPD) and improve the uniformity of gas holdup distribution compared with Rushton turbine, and the gas-liquid mixing efficiency can be further improved with the increase of the self-similar iteration number of self-similarity impeller. The proper increase of impeller speed was beneficial to overcome gas flooding and improve the gas-liquid two phase dispersion uniformity. The increase of gas flow rate obviously increased the gas holdup in liquid phase. Meanwhile, self-similarity impeller could increase the uniformity of bubble size compared with Rushton turbine, and increasingly so with the increase of self-similar iteration number of self-similarity impeller. The uniformity of bubble size was improved with the increase of impeller speed and was decreased with the increase of gas flow rate. In addition, self-similarity impeller could significantly enhance the turbulent intensity and turbulent kinetic energy dissipation rate by the jet flows through the concave-convex edges, which was beneficial to the gas dispersion process.