Abstract

Supercritical CO2 power cycles have promising applications in many fields, the heat transfer of supercritical CO2 is critical to the efficiency and safe operation of cycle system. The adaptive channel was previously proposed by our group to improve heat transfer of supercritical CO2, the performance of heat exchanger with adaptive channel was experimentally studied. Whereas the effect of adaptive channel on heat transfer deterioration of supercritical CO2 and the mechanism remain unclear. In this study, the effect of adaptive channel on heat transfer deterioration of supercritical CO2 and the mechanism are analyzed numerically based on a single channel, the effect of structure on heat transfer is analyzed through the maximum wall temperature and average heat transfer coefficient under the same length and heat transfer area. The results reveal adaptive channel is effective at alleviating heat transfer deterioration with no local peak in wall temperature distribution. The channel variation length of adaptive channel need to be increased from 0.4 to 0.8 with the aggravation of heat transfer deterioration in order to eliminate local wall temperature peak. For the heat transfer deterioration conditions, the maximum wall temperature lowers first and then increases as channel variation length increases, there is a length that makes the maximum wall temperature lowest, which is lowered by more than 40 °C compared with straight channel. The average heat transfer coefficient can be increased by 1.1 ∼ 1.5 times as channel variation length increases. For the no heat transfer deterioration conditions, the maximum wall temperature increases about 30 °C whereas average heat transfer coefficient can be increased by 58 %∼76 % with channel variation length increasing. The mechanism of adaptive channel alleviating heat transfer deterioration is as follows: the fluid velocity always presents an inverted U-shaped distribution along the radial direction in adaptive channel, the radial density difference is less and buoyancy effects heat transfer weakly. The turbulent kinetic energy is kept at high, so the heat near the wall is transferred to the main flow timely.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.