Study on energy properties and failure behaviors of heat-treated granite under static and dynamic compression

Abstract

The material testing machine and the split Hopkinson pressure bar (SHPB) were adopted, respectively, to conduct the static and dynamic compression tests on granite specimens heat treated by different temperatures. The effects of strain rate and heat-treatment temperature on the mechanism of energy evolution of the specimen during deformation and failure process were studied. The results show a significant strain rate effect on the granite, with the energy dissipation density increasing with increasing impact velocity (or strain rate), regardless of the treatment temperature. The specimens heat treated at 300 °C and 700 °C have the minimum and maximum energy dissipation densities, respectively. The specimen in the SHPB tests easily broke into pieces or even powder; while under static compression, only macroscopic fracture surfaces and spalling phenomenon on the specimen were detected. The energy dissipation density is inversely proportional to the compressive strength of the specimen. The rate of energy dissipation change is defined, which can be used to identify the stages in the deformation process of rock and to determine the position of the failure point in the stress-strain curve. For both the dynamic and static compression tests, the value of energy utilization ratio is relatively low, with a maximum value of about 35%.