Abstract
The SiO2 nanoparticles reinforced Cu-matrix composites were prepared by powder metallurgy technology．The influences of SiO2 volume fraction on the properties of hardness、conductivitity rate and wear behavior of Cu-matrix composites were studied. The results showed that conductivity rate was decreased with the increase of the SiO2 volume fraction；whereas the hardness was increased, then decreased and wear behavior was increased. Sintering an hour of performance was superior to the sintering half an hour.When SiO2 nanoparticle volume fraction was achieved 2.5%, comprehensive properties of SiO2/Cu composite were obviously increased.The microstructures revealed that the second phase particles precipitated dispersedly in copper matrix after hot extrusion. with the increase of the strengthen phase particle volume fraction, nanoparticles appeared together and gathered in grain boundary of copper matrix.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
