Abstract
AbstractBlends of polyamide 6 (PA6) and elastomeric ethylene‐octene copolymer (EOR), with and without maleated EOR (EOR‐MA) were studied. EOR‐MA with various amounts of grafted MA and gel content were prepared by reactive extrusion. The effects of EOR‐MA characteristics and composition on the morphology, thermal and mechanical properties of the blends were investigated. EOR‐MA was found to promote the toughness efficiency of PA6 remarkably. High impact resistance was achieved by the use of EOR‐MA containing less than 2% gel. The content of MA grafted on EOR‐MA in the range of 0.5%–1.0% gave a similar effect on the blend properties. The blend containing 20% of EOR grafted with 1% MA exhibited twenty times higher impact strength (1000 J/m) than pure PA6 (55 J/m). The presence of EOR‐MA in the blends led not only to a drastic reduction in the dispersed particle size, but also to some changes in fracture mechanisms, thus enhancing the impact resistance of the blends.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call