Abstract
Properties of oxide layers at the interface between Al metal and YBa 2Cu 3O 7− δ ceramics were investigated using X-ray diffraction (XRD), X-ray photoelectron spectra (XPS) and impedance measurements. There have been found the oriented grains having their c-plane parallel to the surface of YBa 2Cu 3O 7− δ . When Al metal was evaporated onto the ceramics sample, the aluminum oxide layer was produced at the interface between Al and YBa 2Cu 3O 7− δ because Al metal oxidizes more easily. The oxygen-deficiency was observed at the ceramics side of the interface as examined by X-ray photoelectron spectra. This oxygen-deficiency can be partly replenished by post annealing whereas it can be fully replenished for the sample to which the mechanical polishing is applied beforehand in order to remove the oriented grains. The thickness of aluminum oxide layer was evaluated by means of the impedance measurements using the alternating current three-terminal method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
