Study of the selection mechanism of heavy metal (Pb 2+, Cu 2+, Ni 2+, and Cd 2+) adsorption on clinoptilolite

Abstract

The study was carried out on the sorption of heavy metals (Ni 2+, Cu 2+, Pb 2+, and Cd 2+) under static conditions from single- and multicomponent aqueous solutions by raw and pretreated clinoptilolite. The sorption has an ion-exchange nature and consists of three stages, i.e., the adsorption on the surface of microcrystals, the inversion stage, and the moderate adsorption in the interior of the microcrystal. The finer clinoptilolite fractions sorb higher amounts of the metals due to relative enriching by the zeolite proper and higher cleavage. The slight difference between adsorption capacity of the clinoptilolite toward lead, copper, and cadmium from single- and multicomponent solutions may testify to individual sorption centers of the zeolite for each metal. The decrease of nickel adsorption from multicomponent solutions is probably caused by the propinquity of its sorption forms to the other metals and by competition. The maximum sorption capacity toward Cd 2+ is determined as 4.22 mg/g at an initial concentration of 80 mg/L and toward Pb 2+, Cu 2+, and Ni 2+ as 27.7, 25.76, and 13.03 mg/g at 800 mg/L. The sorption results fit well to the Langmuir and the Freundlich models. The second one is better for adsorption modeling at high metal concentrations.