Abstract
Purpose. Determining the real spectrum and the level of dynamic loads would make it possible to develop recommendations for improving the TPA-350 automatic mill, with the aim of expanding its technological capabilities, improving the reliability of operation and durability. Metodology. This work was carried out on the basis of the development of a mathematical model of dynamic processes in the mechanical system of an automatic TPA mill, where an attempt was made to identify the features of the functioning of a working stand with a rolled sleeve in the formulation of dynamic problems. Obviously, the proposed approach is more correct and convenient when studying complex dynamic phenomena in the elements of an automatic TPA mill. Findings. The results of the study of the dynamics of the working stand of the automatic mill of the pipe-rolling unit (TPA) are given The basic parameters of the functioning of the working stand, such as the automatic mill TPA 350, are established, and a mathematical model of the basic problem of the dynamics of a mechanical system is developed. The differential equations of motion for the selected model of the working stand and the elastic elements of the bed retention mechanism on the support nodes of the automatic TPA mill have been compiled. The corresponding patterns of oscillations of the working stand were obtained. Some features of the functioning of the working stand are identified by the example of an automatic mill TPA 350. The dynamic parameters of the working stand of the mill, affecting the difference in the thickness of the rolled sleeves, are established. Originality. The interrelation of the working stand dynamics with the operating conditions of an automatic TPA mill on the basis of a simplified mathematical model of dynamic processes is established. A mathematical model of the mechanical system of a working working stand of an automatic TPA mill has been compiled. In the most general form, the mechanical system of a working stand of a mill is described using differential equations describing the behavior of the selected design scheme of a system with two degrees of freedom. Practical value. A scheme has been proposed for modernizing the working stand and the mechanism for holding the working stand of the TPA-350 automatic mill. IL. 4. Biblography: 8 titles.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.