Study of the differences in collection scope of raw materials of biomass CHP plants caused by regional factors

Abstract

Combined heat and power (CHP) plants fueled by biomass can collect and utilize waste straw resources in a productive way. This paper considers the impact of regional factors on biomass energy potential and the energy needs of the population, so as to study the differences in construction of biomass CHP plants and the collection scope of raw materials, and proposes evaluating suitability for biomass energy development based on scope of resource collection. Taking five counties in China as its study areas, this paper assesses biomass energy potential. A topology system of biomass CHP plants has been reasonably established in different counties through ArcGIS, the required installed capacity has been calculated according to the number of persons served by such plants. Finally, the collection length and corresponding value range of raw materials of CHP plants along roads has been obtained based on biomass energy potential and energy demand. The result shows that the differences in area, straw yield and biomass fuelization rate depending on regions have a great impact on biomass energy potential, while the residue-to-product ratio of straw and biomass calorific value have less of an impact. When the biomass energy per capita of a region reaches 9.75GJ/person, it is suitable for biomass energy development. The installed capacity in the biomass CHP plant system of each study area is mostly within the scope of 3–59 MW, and the collection length of corresponding biomass resources of such plants along roads is mostly within the scope of 5.09–25.23 km.