Abstract
Chromium Cr(III) is considered as a toxic pollutant in industrial wastewater. Photocatalytic processes can be used as an efficient method for the treatment of heavy metal wastewaters. This study was conducted to synthesize copper (II) oxide (CuO) with dendrite, leaf and feather morphologies. Synthesized CuO with dendrite and leaf morphologies were characterized by XRD, SEM, and BET/BJH and CuO with feather morphology by XRD, SEM, BET/BJH, FTIR, TEM and DRS techniques. Parameters such as morphology CuO, the contact time (h), and adsorbent dosage (g) in adsorption of Cr(III) and morphology CuO, pH and initial concentration of Cr(III) in the photocatalytic oxidation were investigated. The results demonstrate that CuO feather at 24 h contact time with 0.1 g adsorbent with an adsorption efficiency of 57.24% has the highest efficiency compared to CuO of dendrite and leaf. Oxidation results demonstrate that CuO feather at 2 h with 0.1 g adsorbent dosage and pH = 7 had 89.14% removal efficiency. Also, oxidation results demonstrate that CuO feather at 2 h with 0.1 g adsorbent dosage and pH = 8 had 99.99% removal efficiency, which indicates the high efficiency of the feather.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.