Study of MIS structures based on CdHgTe and HfO2 applied by PEALD

Abstract

We investigate the HfO2/Hg0.78Cd0.22Te interface fabricated by plasma-enhanced atomic layer deposition (PEALD) at 120 °C During the deposition of HfO2, no donor-like defects are introduced into mercury cadmium telluride. X-ray photoelectron spectroscopy and ellipsometry were used to establish the optimal process regime at 120 °C and to demonstrate how HfO2 layer composition and growth rate per cycle depend on post-plasma purge time; the optimum is achieved at 6 s. Increasing the post-plasma purge time decreases the carbon and nitrogen impurity concentration in the HfO2 layer. Measurements of the admittance of metal-insulator-semiconductor (MIS) structures over the surface of a sample show that the electro-physical properties are uniform. We discuss the method of measuring the admittance of MIS structures that allows us to minimize the contribution of slow states with trapped charge on shape and shift of the C–V curve. The results demonstrate that the densities of fixed charge, slow states, and fast interfacial traps at the HfO2/MCT interface are greater than that for Al2O3/MCT (also formed by PEALD). The interface trap density is estimated from a normalized parallel conductance map, and the HfO2 film adheres well.