Abstract
The kinetics of electrochemical lithium insertion inside RF sputtered Ni/V mixed oxides thin films have been investigated employing different electrochemical techniques. The AC electrochemical impedance spectra, recorded after 10 cycles, showed three steps clearly involved in the intercalation mechanism of lithium in the oxide films: (i) a charge transfer process to the electrolyte/electrode interface; (ii) a solid-state diffusion of Li; and (iii) a space limited diffusion due to the finite volume of the film. This latter portion of the impedance spectra was used to calculate the Li chemical diffusion coefficients ( D Li). D Li values show an initial increase up to an injected charge of 30 mC cm −2 and then, upon further intercalation, a decay probably due to the limited Li motion through a decreased number of available sites. These results are in good agreement with the ones obtained by potentiostatic intermittent titration technique applied to the same electrodes. Both techniques agree in giving the same trend for D Li upon Li intercalation. The same sets of measurements were carried out after 100 and 1000 Li insertion/deinsertion cycles in order to analyze the effect of prolonged cycling on the mechanism of lithium diffusion.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
