Abstract
Abstract In order to analyse flow-induced noise distribution law under the defective runner blade, this paper performs defective treatment on the runner blade according to the HLA855a-LJ-250 hydraulic turbine model. Two kinds of blade models, intact blade and outlet side abrasive blade, are established respectively, and the Realizable k-ε turbulence model and broadband noise source model are used to simulate the hydraulic turbine under rated operating conditions. The simulation results show: 1)Double-row leaf grilles and runner blade are the main dipole flow-induced noise sources; 2)Significant differences in the distribution of the acoustic power levels of the double-row leaf grilles’ characteristic blades and the runners’ characteristic blades under different Schemes; 3)Runner defective blades have less effect on the acoustic power level of spiral case, the rest of the overflow components acoustic power level has a tendency to increase, especially the runner has the greatest impact. The maximum increase in acoustic power level of the runner is almost 17 dB, followed by double-row leaf grilles with an increase of around 8 dB. Therefore, critical attention needs to be paid to the abnormal noise signals of runner and double-row leaf grilles.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.