Abstract
Molybdate conversion coatings are considered as an alternative to chromium conversion coatings for improving the corrosion resistance of AZ31 magnesium alloy. In this study, the formation process of molybdate conversion coatings on AZ31 magnesium alloy was investigated using an open circuit potential curve, scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). The influence of processing parameters of molybdate conversion coatings was studied using electrochemical impedance spectroscopy (EIS) in 3·5 wt-%NaCl solution as a function of pH value, temperature and time. In addition, the mass gain of the coating was also monitored during formation. The results show that the conversion coatings formed at 65°C for 12 min and pH 3 have excellent corrosion resistance properties. Molybdate conversion coatings formed on AZ31 magnesium alloy exhibit a network morphology with many microcracks on the surface of the coatings. The coating is composed of O, Mo, F, Na, P, Mg and Al. The weight gain of the coating during formation follows a parabola-like curve.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
