Abstract

Solid state NMR techniques have been developed to investigate dynamic molecular effects (e.g., molecular reorientations) due to simultaneously applied external electric fields on electrically sensitive materials such as liquid crystals (LC), liquid crystalline polymers (LCP) and polymeric electrets. Such effects can be observed only on relatively thin systems (10–200 μm). That means that many scans are necessary to achieve a sufficiently high signal-to-noise-ratio in the spectra (500–1000 scans). If the material is also magnetically sensitive, the electric field can be used to orient molecules in a starting orientational state and by switching-off the voltage to access fast reorientation processes in the magnetic field B 0. Until now, the behaviour of orientable molecular systems under the influence of electric fields has been investigated by means of a more or less quasistatic approach (LCP: 100 V, electrets: 1 kV) in equilibrium states. The achievable time resolution depends on the desired signal-to-noise-ratio. For the case of proton NMR this means a time resolution of about 10 min. However, very often switching processes occur on a much shorter time scale. Using conventional techniques it is impossible to observe fast (ca. 100 μs) electrically or magnetically induced reorientation processes. In this work, we present a concept to overcome the problems outlined above and to extend the area of our current in situ NMR investigations on thin electrically-switched or poled polymeric layers. The basic idea is to include synchronized electric pulses during the NMR experiment using the preparation and/or mixing periods of a 1D or 2D pulse sequence for the application of an orienting field (electric or magnetic) and to use the reversibility of the molecular switching phenomenon to achieve a sufficient signal-to-noise-ratio. The techniques extend the range of possible investigations from about 100 μs to approximately T 1 for correlated spectra (and to longer times of applied fields for uncorrelated spectra). Results are shown for a nematic LC and a nematic polymer having a similar side chain.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.