Study of dynamic amplification factor of DEMO blanket caused by a gap at the supporting key

Abstract

Among the design activities of the in vessel components for DEMO promoted by European Fusion Development Agreement (EFDA) organization, this work deals with the gap required at the supporting keys of the blanket. Due to its higher operating temperatures compared to the vacuum vessel (VV) ones, this gap will increase during operation.The electro magnetic (EM) loads due to fast disruptions occur on a short time and might accelerate the blanket significantly before it touches the supporting keys, causing an impact of the blanket itself onto the keys. Depending on their stiffness, the EM loads with their short time scale could excite the structure's natural frequencies, causing dynamic amplification. Both phenomena (impact and dynamic amplification) can cause stresses in the structure significantly higher than the static ones.This work develops a finite element model of DEMO blanket to study its non-linear transient dynamic behavior under impact loadings. A VV sector, the ribs between the inner and outer VV, the backward manifolds and the supporting keys of the blanket have been modeled. The analyses have been performed with Abaqus [1] and Ansys [2] FEM codes focused on the displacements of the keys in their housing on the blanket. The dynamic amplification factor has been evaluated as the ratio of dynamic to static displacements in meaningful points of the structure for a growing gap till 5mm.