Abstract
New carrier mobility (μ) data for boron-, phosphorus-, and arsenic-doped Si in a low-energy, high-dose implant regime are measured and studied using continuous anodic oxidation technique/differential Hall effect (CAOT/DHE) technique. The data show that when the doping concentration is >1020/cm3, both hole and electron mobility values are lower than the conventional model predictions, and the electron mobility of the As-doped Si is lower than the P-doped ones. The data also show that when the doping concentration is >1021/cm3, the hole mobility in B-doped Si and the electron mobility in P-doped Si are almost equal and reach as low as ~40 cm2/V sec, and the electron mobility of As-doped Si is the lowest and reaches ~30 cm2/V sec. These mobility data are much lower than the conventional model predictions and are also lower than the previously published data. For the ULSI device and circuit analyses, simulations, and designs, these new mobility data need to be taken into consideration.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call