Abstract
This paper presents the results on in-situ synthesis of refractory metal-intermetallic composites (RMICs), Mo-16Cr-4Si and Mo-11Cr-9Si (wt.%) multiphase alloys and their characterization. The alloys were prepared from the oxides of molybdenum and chromium by their coreduction with Si as reductant. Exothermic nature of the synthesis reactions resulted in the formation of consolidated composite as a product in a single step. As-reduced alloys were remelted by arc melting and heat treatment was given. The evolution of phases and the microstructure were studied by XRD, SEM, and EDS analysis. The multiphase microstructure consist of the silicide phases (Mo,Cr)3Si + (Mo,Cr)5Si3 for hypereutectic and (Mo,Cr)3Si phase distributed in bcc matrix comprising essentially a solid solution of (Mo,Cr) for hypo-peritectic composition. Comparative studies of the synthesized alloys were also carried out to the composition, phases, microstructure, hardness and their oxidation behavior.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
