Abstract

The purpose of this study is to compare the existing optical network conditions that use point to point technology with GPON network designed for Udayana University campuses area in Bukit Jimbaran Bali. The Existing optical network is currently able to serve only 14 buildings from 77 existing productive buildings due to the limited number of available optical cores.. It means in order to connect each building at the campuses area, it is required much more optical fiber. Alternatively is using Gigabit Passive Optical Network (GPON) technology. This research was conducted by analyzing the condition of the existing optical network and designing the GPON network. Here are compared some network feasibility parameters ie Link Power Budget, Rise Time Budget and Bit Error Rate. Then compare the use of cores, the number of subscribers as well as device estimation and transmission costs. The study found that to connect all of the buildings are GPON configuration required only 22 optical cores, compared to 154 cores for eksisting network designs. However, the GPON design has lower network quality but is simpler and much more economical if it is implemented for a wide network.

Highlights

  • The purpose of this study is to compare the existing optical network conditions that use point to point technology with Gigabit Passive Optical Network (GPON) network designed for Udayana University campuses area in Bukit Jimbaran Bali

  • the existing optical network conditions that use point to point technology with GPON network designed for Udayana University campuses area in Bukit Jimbaran Bali

  • It means in order to connect each building at the campuses area

Read more

Summary

PENDAHULUAN

Adalah perguruan tinggi tertua yang berada di Provinsi Bali, Indonesia berdiri pada tanggal 17 Agustus 1962 [1]. Salah satu solusi yang dapat diterapkan untuk memenuhi komunikasi optik ke seluruh gedung yang ada adalah menggunakan tekonogi Gigabit Pasive Optical Network (GPON). GPON adalah salah satu jaringan akses fiber optik yang distandarisasi oleh ITU-T G.984 [8]. Untuk mengetahui perbandingan dari kedua teknologi tersebut, maka dilakukan simulasi jaringan eksisting dan simulasi jaringan GPON yang dirancang. Aplikasi ini dapat digunakan dalam perancangan jaringan optik dengan output yang ditampilkan berupa total daya yang diterima dan Bit Error Rate (BER) [12]. AON adalah jaringan akses yang menggunakan serat optik dan kabel tembaga konvensional serta menggunakan perangkat aktif untuk membagi penggunaan media serat optik. Tujuan dari metode ini adalah untuk menganalisa apakah unjuk kerja jaringan secara keseluruhan telah tercapai dan mampu memenuhi kapasitas kanal yang diinginkan. Dengan nilai Q atau Q-faktor minimal yang bagus dalam komunikasi optik adalah 6 [15]

METODE PERANCANGAN
Simulasi Pada Optisystem Simulasi dilakukan pada aplikasi
Perancangan Jaringan GPON
Simulasi Pada Optisystem
Perbandingan
Perbandingan Kualitas Jaringan
FIBER OPTIC
KESIMPULAN
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call