Abstract
The effect of ultraviolet (UV) curing on film properties of porogen based porous SiOC (P-SiOC) film was investigated. The P-SiOC films were prepared by plasma-enhanced chemical vapor deposition (PECVD) using alkoxysilane and porogen (hydrocarbon). UV curing time was changed from 0 s to 1000 s. The variation of the k value and elastic modulus on the P-SiOC film with UV curing can be classified into three phases. From the behavior of pore density and free volume rate evaluated by using positron annihilation spectroscopy (PAS), the multiphase model for structural modification of P-SiOC film by UV curing was proposed. In addition, the optimum UV curing time for obtaining a superior P-SiOC film with lower k value and higher mechanical strength was determined.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.