Abstract

W-Ti thin films with different Ti contents were prepared by dc magnetron sputtering on silicon substrates of p-type (100) orientation, and the pure W and pure Ti thin films with the same thick were also prepared for comparison. The microstructure and properties of W-Ti thin film were characterized by XRD, SEM, AFM, microhardness tester and four-point probe method. The results show that the thin films exhibited a polycrystalline structure in the form of columnar grains, and only b.c.c. W phase could be registered in the films, and with the increase of Ti content, the solid solution of W-Ti was found. Compared to pure W film, the microhardness of W-Ti films decreased with the increasing of Ti content, while the sheet resistance rises with the increasing of Ti content. The microhardness of W-Ti thin films was higher than pure Ti thin films, and the sheet resistance was lower than pure Ti thin films.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call