Structure and properties of CaO- and ZrO 2-doped TiC xN y coatings for biomedical applications

Abstract

In the present work multicomponent thin films based on the systems Ti–Ca–C–O–N and Ti–Zr–C–O–N have been deposited and evaluated. TiC 0.5+10% CaO and TiC 0.5+10% ZrO 2 targets were manufactured by means of the self-propagating high-temperature synthesis (SHS) method. The synthesized targets were subjected to DC magnetron sputtering in an atmosphere of argon or in a gaseous mixture of argon and nitrogen. The films were characterized in terms of their structure, surface topography, mechanical properties and tribological behavior. The films deposited on Si substrates under optimal conditions showed high hardness in the range of 36–40 GPa, low Young's modulus 260–300 GPa and high percentage of elastic recovery 70–75%. The CaO- and ZrO 2-doped Ti–C–N films showed significantly lower friction coefficient and wear rate against WC+6% Co alloy in comparison to conventional magnetron–sputtered TiC and TiN films. The biocompatibility of the films was evaluated by both in vitro and in vivo experiments (in mice). In vitro studies involved the investigation of the proliferation of fibroblasts Rat-1 and epithelial cells IAR-2 at the tested films and morphometric analysis of the cells cultivated on the films. Fibroblasts and epithelial cells were seeded on the coverslips, coated with examined films and incubated at 37 °C for 24, 48 and 72 h. We did not detect statistically significant differences in the attachment, spreading and proliferation of cultured cells on the coated and the uncoated substrata. The adhesion and proliferation of cells was good at all investigated films. We also did not observe any inflammatory reactions on the implants, inserted under the mouse skin.