Structure and magnetic properties of Fe films with pyramid-like nanostructures deposited by oblique target direct current magnetron sputtering

Abstract

Fe thin films were deposited by oblique target direct current magnetron sputtering on Si (100) and (111) substrates. The structure, surface morphology and magnetic properties of the thin films were characterized using X-ray diffraction, field emission scanning electron microscopy, and superconducting quantum interference device magnetometer, respectively. The results reveal that the structure of the as-deposited Fe thin films is body-centered cubic with the preferential [110] crystalline orientation. A pyramid-like nanostructure with sharp tip was formed on the surfaces of Fe thin films under appropriate sputtering power. Formation of the pyramid-like nanostructure is mainly owed to the enhancement of atomic mobility and the bombardment effect with increasing of sputtering power. Meanwhile, the crystalline orientation of Si substrate and the intrinsic stress in the films are expected to have little contribution to the formation of the pyramid-like nanostructure. The magnetic anisotropy was found in the as-deposited Fe thin films, and varies with the thickness of the Fe thin films. As the film thickness increases from 604 to 1,786 nm, the magnetic anisotropy field and the uniaxial anisotropy constant increase from 3.8 to 5.6 kOe, and from 0.4 × 106 to 1.1 × 106 erg/cm3, respectively, which indicates that besides magnetocrystalline anisotropy, stress induced anisotropy and shape anisotropy also exist in the as-deposited Fe thin films.