Abstract
The paper presents a comprehensive study on the titanium and aluminum clads manufactured by explosive welding. Particularly, the microstructure evolution of the Al/Ti interface at 825K and various annealing time was examined. In the state directly after explosive welding, the wavy morphology of the connection was locally composed of four intermetallic phases: TiAl3, TiAl2, TiAl and Ti3Al, forming small and peninsula-like morphology (vortex). The annealing process mainly caused growth of the TiAl3 phase as a continuous layer. The studies of the growth kinetics showed four stages: incubation period (up to 1.5h), the growth govern by the chemical reaction (1.5–5h), mixed mechanism of chemical reaction and volume diffusion and finally the volume diffusion growth (36–100h). The orientation maps revealed significant differences concerning the microstructure and texture of welded metals. Directly after explosive welding process, aluminum possessed a typical rolled texture, while in titanium intensive twinning was observed. After annealing, due to the secondary recrystallization, abnormal grain growth was observed in aluminum, while in titanium annihilation of deformation twins took place. The hardness profile made across the welded area after annealing showed the highest values between 365–750HV in vortex regions at the Al/Ti interface.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
